Distributed Messages
DistributedMessage
is a class that is used to exchange data between peers in the distributed system. Every message contains the Content
where the actual data is stored and meta-data like address key, message type, and timestamp.
Address Key top#
AddressKey
determines which object will receive the message on other simulations. DistributedComponent
uses own key as an address key so the message will be received by corresponding components on other machines. AddressKey
has to be set when sending a new message.
Content top#
Content
contains the actual data of the message in the BytesStack
object. Note that poping data required reverse order than pushing.
Message Type top#
DistributedMessageType
determines how the message will be handled in the UDP protocol. This type has to be set when sending a new message.
Available distributed message types:
- ReliableUnordered packets won't be dropped, won't be duplicated, can arrive without order.
- Sequenced packets can be dropped, won't be duplicated, will arrive in order.
- ReliableOrdered packets won't be dropped, won't be duplicated, will arrive in order.
- ReliableSequenced packets can be dropped (except the last one), won't be duplicated, will arrive in order.
- Unreliable packets can be dropped, can be duplicated, can arrive without order.
ReliableOrdered messages are the most reliable, but may add significant delays, this type is best for the initialization messages like add new NPC command. Unreliable packets have the lowest delay between sending and handling a message but are not reliable. Snapshots are sent as unreliable, an incoming snapshot will override the data and delayed packets will not be used.
Timestamp top#
The distributed system adds UTC timestamp to every message right before sending it, there is no need to set timestamp value when sending a message. A timestamp of the received message is set before passing the message to the addressed object. This timestamp is already corrected on the client by the value of connection latency and shows the approximate UTC DateTime when the message has been sent by the master.
Bytes Stack top#
BytesStack
is the message's content where the data is stored. Every data has to be represented as a set of bytes and has to be pushed to the stack. BytesStack
class supports byte, int, uint, long, float, double, bool and string values. Operations that can be executed on those values are:
- Push - adds the value on the top of the stack;
- Fetch - reads the data from the top of the stack and does not remove it from the stack;
- Pop - reads the data from the top of the stack and removed it from the stack, note that Pop calls have to be called in reverse order than Push.
Byte Compression top#
ByteCompression
class adds extension methods to the BytesStack
which add different values to the stack with limited bytes count:
- CompressFloatToInt and DecompressFloatFromInt;
- PushEnum and PopEnum;
- PushCompressedColor and PopDecompressedColor;
- PushCompressedVector3 and PushCompressedVector3;
- PushUncompressedVector3 and PopUncompressedVector3;
- PushCompressedPosition and PopDecompressedPosition - position bounds are limited to the map bounds;
- PushCompressedRotation and PopDecompressedRotation.