lgsvl_msgs

lgsvl_msgs is a ROS / ROS2 hybrid package that provides AD stack agnostic message definitions for interfacing with the SVL Simulator.

The package contains the following definitions:

  - Detection3DArray.msg    # A list of 3D detections
  - Detection3D.msg         # 3D detection including id, label, score, and 3D bounding box
  - BoundingBox3D.msg       # A 3D bounding box definition
  - Detection2DArray.msg    # A list of 2D detections
  - Detection2D.msg         # 2D detection including id, label, score, and 2D bounding box
  - BoundingBox2D.msg       # A 2D bounding box definition
  - SignalArray.msg         # A list of traffic light detections
  - Signal.msg              # 3D detection of a traffic light including id, label, score, and 3D bounding box
  - CanBusData.msg          # Can bus data for an ego vehicle published by the simulator
  - VehicleControlData.msg  # Vehicle control commands that the simulator subscribes to
  - VehicleStateData.msg    # Description of the full state of an ego vehicle
  - Ultrasonic.msg          # Minimum detected distance by an ultrasonic sensor
  - VehicleOdometry.msg     # Odometry for an ego vehicle

Installation

lgsvl_msgs is built by the ROS build farm. Binaries can be installed on Ubuntu as follows:

sudo apt update
sudo apt install ros-$ROS_DISTRO-lgsvl_msgs

Note: It may take up to a week for the builds to become available after a release.

Building from source

ROS

• Create a catkin workspace for the package and clone the repository into the source folder:

    mkdir -p catkin_ws/src
    cd catkin_ws/src
    git clone https://github.com/lgsvl/lgsvl_msgs.git

• Build the package from workspace root:

    cd ..
    catkin_make

• Source in terminal where rosnodes who publish / subscribe to the messages are running:

    source devel/setup.bash

ROS 2

• Clone repository and build with colcon:

    git clone https://github.com/lgsvl/lgsvl_msgs.git
    cd lgsvl_msgs
    colcon build

• Source in terminal where rosnodes who publish / subscribe to the messages are running:

    source install/setup.bash